Sponge electrodes with conductive snap rubber insets used in conventional tDCS/tES. SNAPpads are compatible with Soterix Medical SNAPstraps, allowing for accurate and reproducible sponge placement.

Model: SMI_SNAPpad_5x5_50 (50 SNAPpads)
Model: SMI_SNAPpad_5x5_20 (20 SNAPpads)

Model: SMI_SNAPpad_5x7_50 (50 SNAPpads)
Model: SMI_SNAPpad_5x7_20 (20 SNAPpads)

The most reliable and EASY to use headgear for tDCS/tES electrode placements. The SNAPstrap™ can be used to position SNAPpads at designated tDCS/tES locations, maximizing reproducibility and subject comfort. The custom head-gear with fixed electrode sites and built-in cabling makes for a simplistic setup for 1×1 stimulation. Simply open up the pre-saturated SNAPpad™, snap the SNAPpad™ to the cabling at the designated locations on the SNAPstrap™, and load the SNAPstrap™ onto the head. 

Elastic bands for simple positioning of electrodes on the head. The Elastic Fastener “Blue” can be used to position Soterix Medical EASYpads comfortably and simply on the head. All head sizes and most standard electrode positions can be accommodated with single re-usable fastener kit. The Elastic Fastener “Blue” comes in variety of lengths and widths, allowing you to optimize a set-up to your needs. Both 3cm and 5cm width straps are available

Sponge electrode used in conventional tDCS/tES. The The EASYpads provide simple and consistent set-up and are the only electrode system designed by biomedical engineers for the 1×1 platform. Designed for simplicity and consistency, for the most sensitive step in the tDCS/tES setup. The only sponge electrode for tDCS/tES made from medical grade materials and certified bio-compatible (single use only).

Electrode inserts for the EASYpads™ used for conventional tDCS/tES. Each carbon rubber electrode is placed inside an EASYpad. The EASYpad is then connected to a 1×1 device in order to perform a tDCS/tES application. The carbon rubber electrode allows for a dispersed current to uniformly enter the EASYpad in order to prevent “hot spots”. The carbon rubber electrode comes in various sizes in order to properly accommodate the variety of EASYpad sizes.

A supply kit used to conduct 5 sessions of conventional tDCS/tES.
The 5-session EASYkit comprises the disposable saturation container, a plastic bowl, 500 ml saline, 5 syringes, 10 cotton swab sticks, and 10 EASYpads. For a weeklong trial, each 5 session EASYkit can be conveniently assigned to a specific subject. This helps you in keeping track of remaining sessions for the subject as you use up the supplies.

Accessible storage of all of your conventional and HD tDCS/tES devices and accessories. The Clinical Neuromodulation CART is designed to allow accessible storage for all your tDCS devices and accessories. Reinforced plastic protects your equipment from unexpected bumps while the key code digital lock provides security against tampering. The Clinical Neuromodulation CART includes an adjustable bin system that can be customized to your needs and integrated with all Soterix Medical accessories. 

Extension for 1×1 tDCS/tES devices.

Breakout boxes are an economical way to get more out of your 1×1 device. Upgrade to 2×1 or 2×2 with a simple connector for increased flexibility. Break out boxes are compatible with any 1×1 device and head-gear. Additional available montages include bi-frontal anodal stimulation with one cathode return and bilateral stimulation with one anode and cathode on each hemisphere. Breakout boxes are designed to provide a simple-to-use and reliable extension to your 1×1 device with minimal additional cost.

Banana to Pin connecting cables for conventional 1×1 tabletop devices. Each 1×1 connecting cable is color coded Anode ( Red) or Cathode (Black) for ease-of-use. Each cable has one Banana end that connects to the the device and one Pin end that connects to a carbon rubber electrode. The 1×1 connecting cables are compatible with our tabletop 1×1 devices and the 2×1 Breakout boxes.

Banana to Din connecting cables for conventional 1×1 tabletop devices.
Each 1×1 HD connecting cable is color coded Anode ( Red) or Cathode (Black) for ease-of-use. Each cable has one Banana end that connects to the the device and one Din end that connects to an HD electrode. The 1×1 HD connecting cables are compatible with our tabletop 1×1 devices, Breakout boxes, and the tabletop versions of the Galvanic Vestibular Stimulators.

Banana to Din adapter cables for use with conventional 1×1 tabletop devices and SNAPstraps™. Each Banana to Din adapter is color coded Anode (Red) or Cathode (Black) for ease-of-use. Each cable has one Banana end that connects to the device and one Din end that connects to the similarly colored SNAPstrap™ cable. The Banana to Din adapters are compatible with our tabletop 1×1 devices and Soterix Medical SNAPstraps™.

The SIGNAL ISOLATOR provides an isolation between SIGNAL IN and SIGNAL OUT ports on the device.
The SIGNAL ISOLATOR provides an isolation between SIGNAL IN and SIGNAL OUT ports on the device. The isolation is necessary when wall / mains powered devices like DAQ systems (for instance to generate a TRIGGER signal) or standalone TRIGGER signal generating devices are used with Soterix Medical stimulators. The isolation prevents issues that occur with ground loops.